Thursday, June 2, 2016
Samsung Galaxy Victory 4G – Disassembling procedure – How to replace mother board – Mobiles and Smartphoes Repair and Service
Category: Mobiles and Laptops Repair and Service
Contents of this article
- How to remove the case
- How to remove the battery
- How to replace the battery
Samsung Galaxy Victory 4G
DISASSEMBLING PROCEDURE
Place phone face down. Ensure the side with the display screen is not facing you.
Locate battery door and slide open.
Remove battery.
Remove the 7 Phillips 3.93 mm labeled screws by using the Phillips #00 Precision Screwdriver.
Use the plastic opening tool to pry open the back cover.
Insert the tool into the SD card slot and pry around the entire phone.
Remove one Phillips 3.93 mm screw
from bottom center of the phone.
Carefully disconnect 3 ribbons at the shown location. To remove, place tool under the
ribbon and pull slowly to avoid tearing.
Pull the motherboard back and out to the left. Make sure the motherboard is faced straight
up, as shown in the photo.
Place your tool under the labeled area and pull gently to detach the ribbon cable from the
motherboard.
At this point the motherboard should be completely detached from the rest of the phone.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment