Friday, June 3, 2016
HTC Touch Pro CDMA – Disassembling procedure – How to replace the screen – Mobiles and Smartphones Repair and Service
Category: Mobiles and Smartphones Repair and Service
Contents of this article
- How to remove the battery
- How to remove the USB Logic Board
- How to remove the Mother board
HTC Touch Pro CDMA
Make sure your device is an HTC Touch Pro
Gently press on back plate, push toward camera direction.
Use finger to lift up an edge of battery.
Remove 4 screws circled in red using T6 screw driver.
Lift plastic cover near Memory card slot.
Remove 2 screws circled in red using 00 Philip screw driver.
Insert plastic opener tool into side of phone, gently force plastic edge to open. Repeat action around all sides of phone.
Gently unplug connectors marked with blue rectangle. Remove screws circled in red with 00 Phillip screw driver.
Gently lift logic board using plastic opener tool. Be aware of antenna
Remove 4 screws circled in red using 00 Phillip screw driver.
Lift back plate of screen using finger or plastic opener tool
Gently lift conncetors marked with blue rectangles.
Remove 4 screws marked in red circles using 00 philip screw driver.
Lift front keyboard, remove screws circled in red with 00 philip screw driver
With front keyboard removed, gently lift screen with plastic opener tool.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment