Firmware Download: Acer Iconia B1-711 – Disassembling procedure - How to remove the battery – How to remove the case

Monday, June 27, 2016

Acer Iconia B1-711 – Disassembling procedure - How to remove the battery – How to remove the case – How to remove the Logic board

Category: Tablets Repair and Service

Contents of this article

How to remove the case
How to remove the battery
How to replace the Logic board

Acer Iconia B1-711

DISASSEMBLING PROCEDURE

Switch-off the tablet.
Remove any SIM and/or Memory Card.
Start opening near to the Volume Up/Down buttons. It's more well to use a plastic opening tool to avoid damaging the cover.
When lifting the cover, be careful not to tear the Loudspeaker cable at the bottom right side.
Disconnect the Loudspeaker cable from the Logic board.

Before doing anything, disconnect the battery.

With a long plastic tool like a spudger, unstick the battery from the metal LCD shield.

Lithium Ion Battery Pack - 3.8V, 2710mAh

Disconnect and remove the Audio Jack Board flex cable.

Unscrew 2x Philips screws
Remove the board with the Audio Jack Connector.

Remove the Audio jack flex cable.

Remove the metal plate which is placed on the camera connector.
Disconnect the camera flex cable.

Remove the camera.

Remove the tape from the microphone.

Disconnect the Microphone wires and remove the Microphone.

Remove the green rubber and disconnect the touch screen flex cable.

Disconnect the 4 coaxial antenna cables (Wi-Fi, GPS, 3G).
Carefully unstuck the metal folio from the LCD display flex cable.
Remove the 3x Phillips screws.